Automate the setup and split out the steps for headless setup into separate documents.

GetShellWithoutMonitorOnWindows.md

@@ -0,0 +1,31 @@
+# Seting up the Pi without a monitor using Windows
+1. Download and install:
+   * [Notepad++](https://notepad-plus-plus.org/) Alternatively, any other text editor which is capable of editing files with Unix-style line endings.
+   * [Putty]( https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html) Note: You can paste into Putty by right-clicking. No matter where you right-click, the content will be inserted at the position of the cursor, as if you had typed it in.
+1. Watch [this video](https://www.youtube.com/watch?v=xj3MPmJhAPU) The instructions from the video are recreated below, with some changes.
+1. Open the config.txt file on the sd card with Notepad++
+1. Add this line to the end of the file
+    ``` 
+    dtoverlay=dwc2
+    ```
+1. Add a blank line to the end of the file.
+1. Open cmdline.txt with Notepad++
+1. Find the word "rootwait", add this text, separated by spaces, between rootwait and the word following it:
+    ```
+    modules-load=dwc2,g_ether
+    ```
+1. Create a file named ssh (with no extension) at the root
+1. Eject the sd card
+1. Move the sd card to the Pi.
+1. Connect a micro usb cable to the port labeled "USB" on the Raspberry Pi, and to the PC.
+1. On the PC, press your Windows key, type Control Panel.
+1. Open "Network and Sharing Center"
+1. Click "Change adapter settings"
+1. Wait for something labeled "USB Ethernet/RNDIS Gadget" to appear.
+1. Launch Putty
+1. In the Host Name box enter
+    ```
+    pi@raspberrypi.local
+    ```
+1. If you get an "unknown host" error message install Bonjour: https://support.apple.com/kb/DL999 and go back to step 17.
+1. Password is raspberry