carsten/teslausb
1
0
Fork 0
mirror of https://github.com/cimryan/teslausb.git synced 2026-02-28 20:20:32 +00:00
Code Issues Packages Projects Releases Wiki Activity

Consolidate and standardize documentation.

Browse Source
This commit is contained in:
cimryan
2018-10-28 22:28:51 -07:00
parent 4e8f065846
commit 2fe2e4c475
4 changed files with 152 additions and 147 deletions
Download Patch File Download Diff File Expand all files Collapse all files

142
doc/SetupRClone.md
View File

@@ -1,85 +1,93 @@
# Introduction
This guide will show you how to install and configure [rclone4pi](https://github.com/pageauc/rclone4pi/wiki) (based off [rclone](https://rclone.org/)) to archive your saved TeslaCam footage on a number of different remote storage services including (Google Drive, S3 and Dropbox).
This guide will show you how to install and configure [rclone4pi](https://github.com/pageauc/rclone4pi/wiki) (based off [rclone](https://rclone.org/)) to archive your saved TeslaCam footage on one of a number of different remote storage services including Google Drive, S3 and Dropbox.
This guide assumes you have **NOT** run the `setup-teslacam` script yet
You must perform these steps **after** getting a shell on the Pi and **before** running the `setup-teslacam` script on the Pi.
# Step 1: Install rclone4pi
**Make sure to run all commands in these instructions in a single command shell as root. When you return to the [Main Instructions](/README.md) continue running the commands there in this same shell.** This is necessary because:
* The `archiveloop` script runs as root and the rclone config is bound to the user running the config.
* These commands define environment variables that the main setup scripts need.
The first step is to get the [rclone4pi](https://github.com/pageauc/rclone4pi/wiki) binary installed on the raspberry pi. You can do this by executing the following command:
# Quick guide
These instructions will speed you through the process with good defaults. If you encounter an error, or you want to use a different config name than `gdrive` or a different folder name than `TeslaCam`, follow the detailed instuctions, below.
1. Run these commands. Specify the config name `gdrive` when prompted for the config name.
```
sudo -i
curl -L https://raw.github.com/pageauc/rclone4pi/master/rclone-install.sh | bash
rclone config
```
1. Run these commands:
```
export RCLONE_ENABLE=true
export RCLONE_DRIVE=gdrive
export RCLONE_PATH=TeslaCam
rclone mkdir "$RCLONE_DRIVE:$RCLONE_PATH"
rclone lsd "$RCLONE_DRIVE":
```
1. If you didn't encounter any error messages and you see the `TeslaCam` directory listed return to the [Main Instructions](../README.md).
```
curl -L https://raw.github.com/pageauc/rclone4pi/master/rclone-install.sh | bash
```
# Detailed instructions
## Step 1: Install rclone4pi
1. Run this command to enter a command shell for the root user.
```
sudo -i
```
2. Run the following command to install rclone4pi:
```
curl -L https://raw.github.com/pageauc/rclone4pi/master/rclone-install.sh | bash
```
Alternatively, you can install rclone4pi manually by following these [instructions] (https://github.com/pageauc/rclone4pi/wiki#manual-install).
You can also install the script manually by following these [instructions](https://github.com/pageauc/rclone4pi/wiki#manual-install).
Once installed, the script will install rclone-install.sh, rclone-sync.sh and create a subfolder rpi-sync in users home eg. /root
# Step 2: Configure rclone storage system
Next, run this command as root to configure a storage system.
```
rclone config
```
**Important:** Make sure to run this as root since archiveloop runs as root and the rclone config is bound to the user running the config. The config file is also moved with the assumption that the root user ran config.
This will launch an interactive setup with a series of questions. I highly recommend you look at the documents for your storage system by going to [rclone](https://rclone.org/) and selecting your storage system from the pull down menu at the stop.
I've only personally tested this with Google Drive using these [instructions](https://rclone.org/drive/). One thing to note is the importance of setting the correct [scope](https://rclone.org/drive/#scopes) you are providing access to. Carefully read the documentation on [scopes on rclone](https://rclone.org/drive/#scopes) as well as [Google Drive](https://developers.google.com/drive/api/v3/about-auth). I recommend going with drive.file scope.
**Important:** Take note of the name you used for this config. You will need it later. The rest of the document will use `gdrive` as the name since that's what I used.
# Step 2: Configure the archive
1. Run this command to configure an archive:
```
rclone config
```
This will launch an interactive setup with a series of questions. It is recommended that you look at the documentation for your storage system by going to [rclone](https://rclone.org/) and selecting your storage system from the pull down menu at the stop.
It has been confirmed that this process works with Google Drive using these [instructions](https://rclone.org/drive/). If you are using another storage system, please feel encouraged to create an "Issue" describing your challenges and/or your success.
If you are using Google Drive it is important to set the correct [scope](https://rclone.org/drive/#scopes). Carefully read the documentation on [scopes on rclone](https://rclone.org/drive/#scopes) as well as [Google Drive](https://developers.google.com/drive/api/v3/about-auth). The `drive.file` scope is recommended.
**Important:** During the `rclone config` process you will sepcify a name for the configuration. The rest of the document will assume the use of the name `gdrive`; replace this with your chosen configuration name.
1. Run this command:
```
export RCLONE_DRIVE="gdrive"
```
# Step 3: Verify and create storage directory
Run the following command (again, as root) to see the name of the remote drive you just created.
```
rclone listremotes
```
If you don't see the name there, something went wrong and you'll likely have to go back through the config process. If all went well, use
```
rclone lsd gdrive:
```
At this point, you should not see anything if you set your scope correctly. Now we need to create a folder to put all our archives in. You can do this by running this command. I used TeslaCam but you can name it whatever you want as long as you set it in the next step below.
```
rclone mkdir gdrive:TeslaCam
```
Run this one last command again
```
rclone lsd gdrive:
```
Once you confirm that the directoy you just created is there, we're all set to move on!
1. Run the following command to see the name of the remote drive you just created.
```
rclone listremotes
```
If you don't see the name there, something went wrong. Go back through the `rclone config` process.
1. Run this command:
```
rclone lsd "$RCLONE_DRIVE":
```
You should not see any files listed. If you do then you did not set your scope correctly during the `rclone config` process.
1. Choose the name of a folder to hold the archived clips. These instructions will assume you chose the name `TeslaCam`. Substitute the name you chose for this name. Run this command:
```
export RCLONE_PATH="TeslaCam"
```
1. Run the following command to create a folder which will hold the archived clips.
```
rclone mkdir "$RCLONE_DRIVE:TeslaCam"
```
1. Run this command again:
```
rclone lsd "RCLONE_DRIVE":
```
Confirm that the directory `TeslaCam` is present. If not, start over.
# Step 4: Exports
To be able to configure the teslausb pi to use rclone, you'll need to export a few things. On your teslausb pi, run:
Run this command to cause the setup processes which you'll resume in the main instructions to use rclone4pi:
```
export RCLONE_ENABLE=true
export RCLONE_DRIVE=<name of drive>
export RCLONE_PATH=<path to folder>
```
An example of my config is listed below:
```
export RCLONE_ENABLE=true
export RCLONE_DRIVE=gdrive
export RCLONE_PATH=TeslaCam
```
**Note:** `RCLONE_ENABLE=true` is going to disable the default archive server. It also will **not** play nicely with `RSYNC_ENABLE=true` Perhaps future releases will allow both to be defined and function at the same time, for redundancy, but for now just pick one that you'll want the most.
You should be ready to run the setup script now, so return back to step 8 of the [Main Instructions](/README.md).
Now return to the section "Set up the USB storage functionality" in the [main instructions](../README.md).