diff --git a/GetShellWithoutMonitorOnLinux.md b/GetShellWithoutMonitorOnLinux.md
deleted file mode 100644
index 2013114..0000000
--- a/GetShellWithoutMonitorOnLinux.md
+++ /dev/null
@@ -1,43 +0,0 @@
-# Setting up the Pi without a monitor using a Mac or Linux
-
-You can setup the Pi to connect to your Wifi network, and also provide the option to connect over USB networking (Rasberry Pi Zero W or other recent Pi's).
-
-
-**What is USB networking?** 
-Basically what you're doing is using the Pi's capability to emulate a network connection over USB. So you need to get the Pi (the guest) set up to load the proper modules to do so, and then connect from your machine (the host) using a shell (like iTerm+SSH on macOS). It's an alternative to Wifi if needed. 
-
-## Use the update script to setup Wifi and USB networking 
-
-A [script](https://raw.githubusercontent.com/cimryan/teslausb/master/mac_linux_archive/setup-piForHeadlessConfig.sh is provided to automatically update your SD card so the first time you boot it on your Pi, USB networking and Wifi will automatically be configured. 
-
-If you prefer not to run the script, it's also a useful reference for the steps you'll need to take. 
-
-> It's important you do these steps **before you boot the Pi the first time with the SD card inserted**. 
-
-1. Ensure you've flashed your Raspbian image to your SD card. 
-1. If the `boot` folder isn't showing on your computer, eject and re-insert the SD card into your computer, **not the Raspberry Pi**. 
-1. Change to the directory where the SD card's `boot` folder (containing `cmdline.txt`) is located. On a Mac, this will be `/Volumes/boot`. On Linux the location may vary. 
-1. Run the following commands:
-    ```
-    wget https://raw.githubusercontent.com/cimryan/teslausb/master/mac_linux_archive/setup-piForHeadlessConfig.sh
-    chmod +x setup-piForHeadlessConfig.sh
-    ```
-1. Set your SSID (Wifi network name) and WIFIPASS environment variables. The script will insert them into the `wpa_supplicant.conf` when creating it:
-
-    ```
-    export SSID=your_ssid_here
-    export WIFIPASS=your_wifi_password_here
-    ```
-1. Run the script: 
-    `./setup-piForHeadlessConfig.sh`
-1. If all goes well, the script will report: 
-    `-- Files updated and ready for Wifi and SSH over USB --`
-1. Eject the SD card safely, insert into your Pi, and reboot. If the Pi is connected over USB to your host, and/or if the Wifi setup went correctly, you should be able to `ssh pi@raspberrypi.local`. The default password is `raspberry`. 
-
-    > Note: If you receive an error indicating that the host id has changed, edit your computer's `~/.ssh/known_hosts` file. Find the line with the IP address of your Pi, or labeled "raspberrypi.local" and delete the entire line. You're especially likely to encounter this error if you're following these instructions for a second time.
-
-## Manual/other resources
-
-* [Gist (text file) showing example steps to setup USB networking](https://gist.github.com/gbaman/975e2db164b3ca2b51ae11e45e8fd40a)
-
-If manually configuring the Pi vs using the update script, be sure to delete the `init=/usr/lib/raspi-config/init_resize.sh` parameter from cmdline.txt to prevent the os partition from being expanded to fill the drive.
diff --git a/README.md b/README.md
index c672958..fa902c4 100644
--- a/README.md
+++ b/README.md
@@ -50,19 +50,25 @@ Download and install:
 * [Etcher](http://etcher.io)
  
 ## Create your archive
-### Hosting on Windows
-Set up a share on a Windows (or macOS using Sharing, or Linux using Samba) machine to host the archive. These instructions assume that you created a share named "SailfishCam" on the server "Nautilus". It is recommended that you create a new user. Grant the user you'll be using read/write access to the share. These instructions will assume that the user you've created is named "sailfish" and that the password for this user is "pa$$w0rd".
+### Hosting on Windows File Shares, MacOS Sharing, or Samba on Linux
+Set up a share to host the archive. These instructions assume that you created a share named "SailfishCam" on the server "Nautilus". It is recommended that you create a new user. Grant the user you'll be using read/write access to the share. These instructions will assume that the user you've created is named "sailfish" and that the password for this user is "pa$$w0rd".
 
-Get the IP address of the archive machine. You'll need this later, so write it down, somewhere. You can do this by opening a command prompt on the archive machine and typing ipconfig. Get the IP address from the line labeled "IPv4 Address". These instructions will assume that the IP address of the archive server is 192.168.0.41.
+Get the IP address of the archive machine. You'll need this later, so write it down, somewhere.
+* On Windows you can do this by opening a command prompt on the archive machine and typing ipconfig. Get the IP address from the line labeled "IPv4 Address". These instructions will assume that the IP address of the archive server is 192.168.0.41.
+* On MacOS or Linux open a terminal and type ifconfig.
 
-### TODO Other hosting solutions
+### Hosting via SFTP/rsync
+**EXPERIMENTAL - Hosting the archive on SFTP hasn't been thoroughly tested**
+
+Since sftp/rsync is accessing a computer through SSH, the only requirement for hosting an SFTP/rsync server is to have a box running Linux. An example can be another Raspberry Pi connected to your local network with a USB storage drive plugged in. The official Raspberry Pi site has a good example on [how to mount an external drive](https://www.raspberrypi.org/documentation/configuration/external-storage.md). You will need the username and host/IP of the storage server, as well as the path for the files to go in, and the storage server will need to allow SSH.
+
+### ***TODO: Other hosting solutions***
 
 ## Set up the Raspberry Pi
-There are four phases to setting up the Pi:
+There are three phases to setting up the Pi:
 1. Get the OS onto the micro sd card.
 1. Get a shell on the Pi.
 1. Set up the USB storage functionality.
-1. Get the Pi set up for your Tesla.
 
 ### Get the OS onto the micro SD card
 
@@ -72,14 +78,18 @@ There are four phases to setting up the Pi:
    > Note: you don't need to uncompress the zip file you downloaded.
 
 ### Get a shell on the Pi
-If you used a Windows computer to flash the OS onto the MicroSD card, follow these [Instructions](GetShellWithoutMonitorOnWindows.md).
-If you used a Mac or a Linux computer, follow these [Instructions](GetShellWithoutMonitorOnLinux.md).
+If you used a Windows computer to flash the OS onto the MicroSD card, follow these [Instructions](doc/GetShellWithoutMonitorOnWindows.md).
+
+If you used a Mac or a Linux computer, follow these [Instructions](doc/GetShellWithoutMonitorOnLinux.md).
 
 ### Set up the USB storage functionality
 
 Now that you have Wifi up and running, it's time to set up the USB storage and scripts that will manage the dashcam and (optionally) music storage.
 
-1. SSH to the Pi and run `sudo -i`
+1. SSH to the Pi and run
+    ```
+    sudo -i
+    ```
 1. Try to ping your archive server from the Pi. In this example the server is named `nautilus`.
     ```
     ping -c 3 nautilus
@@ -89,47 +99,54 @@ Now that you have Wifi up and running, it's time to set up the USB storage and s
     ping 192.168.0.41
     ```
 1. If you can't ping the archive server by IP address from the Pi, you should go do whatever you need to on your network to fix that. If you can't reach the archive server by name, from the Pi but you can by IP address, then use its IP address, below, in place of its name.
-1. Run these commands, subsituting your values. The last line is the percent of the drive you want to allocate for dashcam storage. The remaining percentage will be allocated for music.
+1. Determine how much, as a percentage, of the drive you want to allocate to recording dashcam footage by using:
+    ```
+    export campercent=<number>
+    ```
+    For example, using `export campercent=100` would allocate 100% of the space to recording footage from your car, and would not create a separate music partition. `export campercent=50` would be only allocate half of the space for a dashcam footage drive, and allocates the other half to be a music storage drive.
+1. If you are trying to archive on an SFTP/rsync server, then follow these [instructions](doc/SetupRSync.md) and skip step 7. Otherwise, skip this step.
+1. If you are trying to archive on a shared drive, run these commands, subsituting your values for your shared drive:
     ```
     export archiveserver=Nautilus
     export sharename=SailfishCam
     export shareuser=sailfish
     export sharepassword=pa$$w0rd
-    export campercent=100
     ```
-1. If you'd like to receive a text message when your Pi finishes archiving clips follow these [Instructions](ConfigureNotificationsForArchive.md).
+1. If you'd like to receive a text message when your Pi finishes archiving clips follow these [Instructions](doc/ConfigureNotificationsForArchive.md).
 1. Run these commands:
     ```
-    wget https://raw.githubusercontent.com/cimryan/teslausb/master/windows_archive/setup-teslausb
+    wget https://raw.githubusercontent.com/cimryan/teslausb/master/setup/pi/setup-teslausb
     chmod +x setup-teslausb
     ./setup-teslausb
     ```
 1. Run this command:
     ```
-    reboot
+    halt
     ```
+1. Disconnect the Pi from the computer.
 
-After reboot, the Pi hostname will become `teslausb`, so future `ssh` sessions will be `ssh pi@teslausb.local`. 
+On the next boot, the Pi hostname will become `teslausb`, so future `ssh` sessions will be `ssh pi@teslausb.local`. 
 
-### Get the Pi set up for your Tesla.
-If you set up the Pi with a keyboard and a monitor disconnect it and connect it to a PC. If you're using a cable be sure to use the port labeled "USB" on the circuitboard. 
-1. Wait for the Pi to show up on the PC as a USB drive.
-1. Create a directory named TeslaCam at the root of the drive labeled CAM.
+Your Pi is now ready to be plugged into your Tesla. If you want to add music to the Pi, follow the instructions in the next section.
+
+## (Optional) Add music to the Pi
+Connect the Pi to a computer. If you're using a cable be sure to use the port labeled "USB" on the circuitboard. 
+1. Wait for the Pi to show up on the computer as a USB drive.
 1. Copy any music you'd like to the drive labeled MUSIC.
 1. Eject the drives.
 1. Unplug the Pi from the PC.
 1. Plug the Pi into your Tesla.
 
 ## Making changes to the system after setup
-The setup process configures the Pi with read-only file systems for the operating system but with read-write access through the USB
- interface. This means that you'll be able to record dashcam video and add and remove music files but you won't be able to make changes 
- to files on / or on /boot. This is to protect against corruption of the operating system when the Tesla cuts power to the Pi.
+The setup process configures the Pi with read-only file systems for the operating system but with read-write
+access through the USB interface. This means that you'll be able to record dashcam video and add and remove
+music files but you won't be able to make changes to files on / or on /boot. This is to protect against
+corruption of the operating system when the Tesla cuts power to the Pi.
 
 To make changes to the system partitions:
 ```
 ssh pi@teslausb.
 sudo -i
-mount / -o remount,rw
-mount /boot -o remount,rw
+/root/bin/remountfs_rw
 ```
 Then make whatever changes you need to. The next time the system boots the partitions will once again be read-only.
diff --git a/ConfigureNotificationsForArchive.md b/doc/ConfigureNotificationsForArchive.md
similarity index 100%
rename from ConfigureNotificationsForArchive.md
rename to doc/ConfigureNotificationsForArchive.md
diff --git a/doc/GetShellWithoutMonitorOnLinux.md b/doc/GetShellWithoutMonitorOnLinux.md
new file mode 100644
index 0000000..2439691
--- /dev/null
+++ b/doc/GetShellWithoutMonitorOnLinux.md
@@ -0,0 +1,35 @@
+# Getting a shell on the Pi without a monitor using a Mac or Linux
+
+These instructions will configure a Raspberry Pi so that you can proceed with the next step of setting it up as a smart USB drive for your Tesla. Specifically, these intructions will configure your Pi to join your wireless network and also enable you to ssh to the Pi, either over your wireless network or through a USB connection.
+
+**Important:** Do these steps before you boot the Pi for the first time. 
+
+1. Ensure you've flashed your Raspbian image to your SD card. 
+1. If the `boot` folder isn't showing on your computer, eject and re-insert the SD card into your computer, **not the Raspberry Pi**. 
+1. Change to the directory where the SD card's `boot` folder (containing `cmdline.txt`) is located. On a Mac, this will be `/Volumes/boot`. On Linux the location may vary; on recent Ubuntu installations it will be /media/$USER/boot
+1. Run the following commands:
+    ```
+    wget https://raw.githubusercontent.com/cimryan/teslausb/master/setup/macos_linux/setup-piForHeadlessConfig.sh
+    chmod +x setup-piForHeadlessConfig.sh
+    ```
+1. Set your SSID (Wifi network name) and WIFIPASS environment variables. The script will insert them into the `wpa_supplicant.conf` when creating it:
+    ```
+    export SSID=your_ssid_here
+    export WIFIPASS=your_wifi_password_here
+    ```
+1. If you're using a Mac, run this command
+    ```
+    ./setup-piForHeadlessConfig.sh /Volumes/boot
+    ```
+1. If you're using Ubuntu, run this command:
+    ```
+    ./setup-piForHeadlessConfig.sh /media/$USER/boot
+    ```
+    > If you're using another Linux distribution figure out the path to where the boot partitio of the SD card is mounted and specify that path, instead.
+1. If all goes well, the script will report: 
+    ```
+    -- Files updated and ready for Wifi and SSH over USB --
+    ```
+1. Eject the SD card safely, insert into your Pi, and reboot. If the Pi is connected over USB to your host, and/or if the Wifi setup went correctly, you should be able to `ssh pi@raspberrypi.local`. The default password is `raspberry`. 
+
+    > Note: If you receive an error indicating that the host id has changed, edit your computer's `~/.ssh/known_hosts` file. Find the line with the IP address of your Pi, or labeled "raspberrypi.local" and delete the entire line. You're especially likely to encounter this error if you're following these instructions for a second time.
diff --git a/GetShellWithoutMonitorOnWindows.md b/doc/GetShellWithoutMonitorOnWindows.md
similarity index 92%
rename from GetShellWithoutMonitorOnWindows.md
rename to doc/GetShellWithoutMonitorOnWindows.md
index 86a8773..0142aeb 100644
--- a/GetShellWithoutMonitorOnWindows.md
+++ b/doc/GetShellWithoutMonitorOnWindows.md
@@ -14,7 +14,8 @@
 1. Run the following commands:
     ```
     cd ~
-    wget https://raw.githubusercontent.com/cimryan/teslausb/master/windows_archive/setup-piForHeadlessConfig.ps1 -OutFile setup-piForHeadlessConfig.ps1
+    wget https://raw.githubusercontent.com/cimryan/teslausb/master/setup/windows/setup-piForHeadlessConfig.ps1 -OutFile setup-piForHeadlessConfig.ps1
+    wget https://raw.githubusercontent.com/cimryan/teslausb/master/setup/windows/WpaSupplicantConf.psm1 -OutFile WpaSupplicantConf.psm1
     ./setup-piForHeadlessConfig.ps1 -Verbose
     ```
 1. Enter the single letter of the "boot" drive and press Enter.
diff --git a/doc/SetupRSync.md b/doc/SetupRSync.md
new file mode 100644
index 0000000..7106a7a
--- /dev/null
+++ b/doc/SetupRSync.md
@@ -0,0 +1,43 @@
+# Introduction
+This guide will show you how to utilize [rsync](https://rsync.samba.org/) to archive your saved TeslaCam footage on a remote storage server. In my case, I use this for a networked pi storage server.
+
+This guide makes the following assumptions:
+1. You are running your own ftp/rsync server that you have admin rights to, or can at least add a public key to its `~/.ssh/authorized_keys` file
+1. The ftp/rsync server has rsync installed (raspbian automatically does)
+2. You have **NOT** run the `setup-teslacam` script yet
+# Step 1: Authentication
+Similar to sftp, rsync by default utilizes ssh to connect to a remote server and transfer files. This guide will use a generated ssh keypair, hence the first assumption above.
+
+1. On your teslausb pi, run `ssh-keygen` to generate an ssh key **for the ROOT user!** If you followed the previous steps, you should have already ran `sudo -i` to become the root user on the telsausb pi. If you didn't, run `sudo -i` and re-run `ssh-keygen`. You can be sure that it is generating for root if it asks to store the key in `/root/.ssh/` (versus something like `/home/pi/.ssh`). 
+
+1. Add the contents of the newly generated `/root/.ssh/id_rsa.pub` file from your teslausb pi to the storage server's `~/.ssh/authorized_keys` file. This will allow a nice and easy connection through rsync, no passwords needed!
+
+1. Lastly, you will need to authorize the connection to the FTP/Rsync server and test that the key works, so try connecting to the server (through ssh), and **if it asks if you wish to continue connecting, make sure to type `yes`!** If you do not do this, rsync will fail to connect and thus fail to archive your clips.
+
+# Step 2: Exports
+To be able to configure the teslausb pi use rsync, you'll need to export a few things. On your teslausb pi, run:
+
+```
+export RSYNC_ENABLE=true
+export RSYNC_USER=<ftp username>
+export RSYNC_SERVER=<ftp IP/host>
+export RSYNC_PATH=<destination path to save in>
+```
+
+Explanations for each:  
+* `RSYNC_ENABLE`: `true` for enabling rsync
+* `RSYNC_USER`: The user on the FTP server
+* `RSYNC_SERVER`: The IP address/hostname of the destination machine
+* `RSYNC_PATH`: The path on the destination machine where the files will be saved
+
+An example (of my) config is listed below:
+
+```
+export RSYNC_ENABLE=true
+export RSYNC_USER=pi
+export RSYNC_SERVER=192.168.1.254
+export RSYNC_PATH=/mnt/PIHDD/TeslaCam/
+```
+***Note: RSYNC_ENABLE=true is going to disable the default archive server. Perhaps future releases will allow both to be defined and function at the same time, for redundancy, but for now just pick one that you'll want the most.***
+
+You should be ready to run the setup script now, so return back to step 8 of the [Main Instructions](README.md).
\ No newline at end of file
diff --git a/run/archive-teslacam-clips b/run/archive-teslacam-clips
new file mode 100644
index 0000000..a29be15
--- /dev/null
+++ b/run/archive-teslacam-clips
@@ -0,0 +1,35 @@
+#!/bin/bash -eu
+
+export LOG_FILE=/tmp/archive-teslacam-clips.log
+export ARCHIVE_MOUNT=/mnt/archive
+
+function log () {
+  echo "$( date )" >> "$LOG_FILE"
+  echo "$1" >> "$LOG_FILE"
+}
+
+function disconnect_usb_drives_from_host () {
+  log "Disconnecting usb from host..."
+  modprobe -r g_mass_storage
+  log "Disconnected usb from host."
+}
+
+export -f log
+
+log "Starting..."
+
+/root/bin/connect-archive.sh
+
+disconnect_usb_drives_from_host
+
+ensure_cam_file_is_mounted
+
+fix_errors_in_cam_file
+
+/root/bin/archive-clips.sh
+
+/root/bin/disconnect-archive.sh
+
+unmount_cam_file
+
+connect_usb_drives_to_host
diff --git a/windows_archive/archiveloop b/run/archiveloop
similarity index 97%
rename from windows_archive/archiveloop
rename to run/archiveloop
index 257eba9..006540e 100644
--- a/windows_archive/archiveloop
+++ b/run/archiveloop
@@ -1,7 +1,5 @@
 #!/bin/bash -eu
-
-# Change the value on the right side of the equal sign to the name of the server hosting the archive.
-ARCHIVE_HOST_NAME=archiveserver
+ARCHIVE_HOST_NAME="$1"
 
 LOG_FILE=/tmp/archiveloop.log
 
diff --git a/run/cifs_archive/archive-clips.sh b/run/cifs_archive/archive-clips.sh
new file mode 100644
index 0000000..26b634f
--- /dev/null
+++ b/run/cifs_archive/archive-clips.sh
@@ -0,0 +1,18 @@
+#!/bin/bash -eu
+
+log "Moving clips to archive..."
+
+NUM_FILES_MOVED=0
+
+for file_name in "$CAM_MOUNT"/TeslaCam/saved*; do
+  [ -e "$file_name" ] || continue
+  log "Moving $file_name ..."
+  mv -- "$file_name" "$ARCHIVE_MOUNT" >> "$LOG_FILE" 2>&1 || echo ""
+  log "Moved $file_name."
+  NUM_FILES_MOVED=$((NUM_FILES_MOVED + 1))
+done
+log "Moved $NUM_FILES_MOVED file(s)."
+
+/root/bin/send-pushover "$NUM_FILES_MOVED"
+
+log "Finished moving clips to archive."
diff --git a/run/cifs_archive/configure-archive.sh b/run/cifs_archive/configure-archive.sh
new file mode 100644
index 0000000..eff994f
--- /dev/null
+++ b/run/cifs_archive/configure-archive.sh
@@ -0,0 +1,26 @@
+#!/bin/bash -eu
+
+function configure_archive () {
+  local archive_server_ip_address="$1"
+
+  echo "Configuring the archive..."
+  
+  local archive_path="/mnt/archive"
+
+  if [ ! -e "$archive_path" ]
+  then
+    mkdir "$archive_path"  
+  fi
+
+  local credentials_file_path="/root/.teslaCamArchiveCredentials"
+
+  /root/bin/write-archive-credentials-to.sh "$credentials_file_path"
+
+  echo "//$archive_server_ip_address/$sharename $archive_path cifs vers=${cifs_version},credentials=${credentials_file_path},iocharset=utf8,file_mode=0777,dir_mode=0777 0" >> /etc/fstab
+
+  echo "Configured the archive."
+}
+
+ARCHIVE_SERVER_IP_ADDRESS="$( /root/bin/get-archiveserver-ip-address.sh )"
+
+configure_archive "$ARCHIVE_SERVER_IP_ADDRESS"
\ No newline at end of file
diff --git a/run/cifs_archive/connect-archive.sh b/run/cifs_archive/connect-archive.sh
new file mode 100644
index 0000000..c93f12f
--- /dev/null
+++ b/run/cifs_archive/connect-archive.sh
@@ -0,0 +1,9 @@
+#!/bin/bash -eu
+
+function ensure_archive_is_mounted () {
+  log "Ensuring cam archive is mounted..."
+  ensure_mountpoint_is_mounted_with_retry "$ARCHIVE_MOUNT"
+  log "Ensured cam archive is mounted."
+}
+
+ensure_archive_is_mounted
diff --git a/run/cifs_archive/disconnect-archive.sh b/run/cifs_archive/disconnect-archive.sh
new file mode 100644
index 0000000..dee089a
--- /dev/null
+++ b/run/cifs_archive/disconnect-archive.sh
@@ -0,0 +1,2 @@
+#!/bin/bash -eu
+# Nothing to do. It's okay to leave the archive mounted.
\ No newline at end of file
diff --git a/run/cifs_archive/verify-archive-configuration.sh b/run/cifs_archive/verify-archive-configuration.sh
new file mode 100644
index 0000000..614e88b
--- /dev/null
+++ b/run/cifs_archive/verify-archive-configuration.sh
@@ -0,0 +1,47 @@
+#!/bin/bash -eu
+
+function check_archive_server_reachable () {
+  echo "Verifying that the archive server $archiveserver is reachable..."
+  local serverunreachable=false
+  ping -c 1 -w 1 "$archiveserver" 1>/dev/null 2>&1 || serverunreachable=true
+
+  if [ "$serverunreachable" = true ]
+  then
+    echo "STOP: The archive server $archiveserver is unreachable. Try specifying its IP address instead."
+    exit 1
+  fi
+
+  echo "The archive server is reachable."
+}
+
+function check_archive_mountable () {
+  local archive_server_ip_address="$1"
+  
+  local test_mount_location="/tmp/archivetestmount"
+  
+  if [ ! -e "$test_mount_location" ]
+  then
+    mkdir "$test_mount_location"
+  fi
+  
+  local tmp_credentials_file_path="/tmp/teslaCamArchiveCredentials"
+  
+  /root/bin/write-archive-credentials-to.sh "$tmp_credentials_file_path"
+  
+  local mount_failed=false
+  mount -t cifs "//$archive_server_ip_address/$sharename" "$test_mount_location" -o "vers=${cifs_version},credentials=${tmp_credentials_file_path},iocharset=utf8,file_mode=0777,dir_mode=0777" || mount_failed=true
+
+  if [ "$mount_failed" = true ]
+  then
+    echo "STOP: The archive couldn't be mounted with CIFS version ${cifs_version}. Try specifying a lower number for the CIFS version like this: export cifs_version=2"
+    exit 1
+  fi
+  
+  umount "$test_mount_location"
+}
+
+check_archive_server_reachable
+
+ARCHIVE_SERVER_IP_ADDRESS="$( /root/bin/get-archiveserver-ip-address.sh )"
+
+check_archive_mountable "$ARCHIVE_SERVER_IP_ADDRESS"
diff --git a/run/cifs_archive/write-archive-credentials-to.sh b/run/cifs_archive/write-archive-credentials-to.sh
new file mode 100644
index 0000000..edce256
--- /dev/null
+++ b/run/cifs_archive/write-archive-credentials-to.sh
@@ -0,0 +1,6 @@
+#!/bin/bash -eu
+
+FILE_PATH="$1"
+
+echo "username=$shareuser" > "$FILE_PATH"
+echo "password=$sharepassword" >> "$FILE_PATH"
diff --git a/run/get-archiveserver-ip-address.sh b/run/get-archiveserver-ip-address.sh
new file mode 100644
index 0000000..8a3936e
--- /dev/null
+++ b/run/get-archiveserver-ip-address.sh
@@ -0,0 +1,3 @@
+#!/bin/bash -eu
+
+echo "$(ping -c 1 -w 1 $archiveserver 2>/dev/null | head -n 1 | grep -o -e "(\([[:digit:]]\{1,3\}\.\)\{3\}[[:digit:]]\{1,3\})" | tr -d '()')"
\ No newline at end of file
diff --git a/windows_archive/remountfs_rw b/run/remountfs_rw
similarity index 100%
rename from windows_archive/remountfs_rw
rename to run/remountfs_rw
diff --git a/run/rsync_archive/archive-clips.sh b/run/rsync_archive/archive-clips.sh
new file mode 100644
index 0000000..29f5a55
--- /dev/null
+++ b/run/rsync_archive/archive-clips.sh
@@ -0,0 +1,16 @@
+#!/bin/bash -eu
+
+log "Archiving through rsync..."
+
+source /root/.teslaCamRsyncConfig
+
+num_files_moved=$(rsync -auvh --stats --log-file=/tmp/archive-rsync-cmd.log /mnt/cam/TeslaCam/saved* $user@$server:$path | awk '/files transferred/{print $NF}')
+
+/root/bin/send-pushover "$num_files_moved"
+
+if [ $num_files_moved > 0 ]
+then
+  log "Successfully synced files through rsync."
+else
+  log "No files to archive through rsync."
+fi
diff --git a/run/rsync_archive/configure-archive.sh b/run/rsync_archive/configure-archive.sh
new file mode 100644
index 0000000..4fcb84c
--- /dev/null
+++ b/run/rsync_archive/configure-archive.sh
@@ -0,0 +1,16 @@
+#!/bin/bash -eu
+
+function configure_archive () {
+  local archive_server_ip_address="$1"
+
+  echo "Configuring the archive..."
+  
+  echo "Configuring for Rsync..."
+  echo "user=$RSYNC_USER" > /root/.teslaCamRsyncConfig
+  echo "server=$RSYNC_SERVER" >> /root/.teslaCamRsyncConfig
+  echo "path=$RSYNC_PATH" >> /root/.teslaCamRsyncConfig
+}
+
+ARCHIVE_SERVER_IP_ADDRESS="$( /root/bin/get-archiveserver-ip-address.sh )"
+
+configure_archive "$ARCHIVE_SERVER_IP_ADDRESS"
\ No newline at end of file
diff --git a/run/rsync_archive/connect-archive.sh b/run/rsync_archive/connect-archive.sh
new file mode 100644
index 0000000..cfcbd8e
--- /dev/null
+++ b/run/rsync_archive/connect-archive.sh
@@ -0,0 +1,2 @@
+#!/bin/bash -eu
+# Nothing to do.
\ No newline at end of file
diff --git a/run/rsync_archive/disconnect-archive.sh b/run/rsync_archive/disconnect-archive.sh
new file mode 100644
index 0000000..cfcbd8e
--- /dev/null
+++ b/run/rsync_archive/disconnect-archive.sh
@@ -0,0 +1,2 @@
+#!/bin/bash -eu
+# Nothing to do.
\ No newline at end of file
diff --git a/run/rsync_archive/verify-archive-configuration.sh b/run/rsync_archive/verify-archive-configuration.sh
new file mode 100644
index 0000000..95dbbf8
--- /dev/null
+++ b/run/rsync_archive/verify-archive-configuration.sh
@@ -0,0 +1 @@
+#!/bin/bash -eu
\ No newline at end of file
diff --git a/run/send-pushover b/run/send-pushover
new file mode 100644
index 0000000..3a6192a
--- /dev/null
+++ b/run/send-pushover
@@ -0,0 +1,21 @@
+#!/bin/bash -eu
+
+NUM_FILES_MOVED="$1"
+
+function log () {
+  echo "$( date )" >> "$LOG_FILE"
+  echo "$1" >> "$LOG_FILE"
+}
+
+if [ -r "/root/.teslaCamPushoverCredentials" ] && [ $NUM_FILES_MOVED > 0]
+then
+  log "Sending Pushover message for moved files."
+
+  source /root/.teslaCamPushoverCredentials
+
+  curl -F "token=$pushover_app_key" \
+  -F "user=$pushover_user_key" \
+  -F "title=Dashcam Copy Complete" \
+  -F "message=$NUM_FILES_MOVED file(s) were copied." \
+  https://api.pushover.net/1/messages
+fi
diff --git a/mac_linux_archive/setup-piForHeadlessConfig.sh b/setup/macos_linux/setup-piForHeadlessConfig.sh
old mode 100755
new mode 100644
similarity index 100%
rename from mac_linux_archive/setup-piForHeadlessConfig.sh
rename to setup/macos_linux/setup-piForHeadlessConfig.sh
diff --git a/windows_archive/create-backingfiles-partition.sh b/setup/pi/create-backingfiles-partition.sh
similarity index 100%
rename from windows_archive/create-backingfiles-partition.sh
rename to setup/pi/create-backingfiles-partition.sh
diff --git a/windows_archive/create-backingfiles.sh b/setup/pi/create-backingfiles.sh
similarity index 90%
rename from windows_archive/create-backingfiles.sh
rename to setup/pi/create-backingfiles.sh
index a406df4..69f19b4 100644
--- a/windows_archive/create-backingfiles.sh
+++ b/setup/pi/create-backingfiles.sh
@@ -21,6 +21,12 @@ function add_drive () {
   echo "$filename $mountpoint vfat noauto,users,umask=000 0 0" >> /etc/fstab
 }
 
+function create_teslacam_directory () {
+  mount /mnt/cam
+  mkdir /mnt/cam/TeslaCam
+  umount /mnt/cam
+}
+
 FREE_1K_BLOCKS="$(df --output=avail --block-size=1K /backingfiles/ | tail -n 1)"
 
 CAM_DISK_SIZE="$(( $FREE_1K_BLOCKS * $CAM_PERCENT / 100 ))"
@@ -36,3 +42,5 @@ then
 else
   echo "options g_mass_storage file=$CAM_DISK_FILE_NAME removable=1 ro=0 stall=0 iSerialNumber=123456" > "$G_MASS_STORAGE_CONF_FILE_NAME"
 fi
+
+create_teslacam_directory
diff --git a/windows_archive/make-root-fs-readonly.sh b/setup/pi/make-root-fs-readonly.sh
similarity index 100%
rename from windows_archive/make-root-fs-readonly.sh
rename to setup/pi/make-root-fs-readonly.sh
diff --git a/setup/pi/setup-teslausb b/setup/pi/setup-teslausb
new file mode 100644
index 0000000..abf884a
--- /dev/null
+++ b/setup/pi/setup-teslausb
@@ -0,0 +1,247 @@
+#!/bin/bash -eu
+
+USER_ENABLED_PUSHOVER=false
+
+REPO=${REPO:-cimryan}
+
+BRANCH=${BRANCH:-master}
+
+if ! [ $(id -u) = 0 ]
+then
+  echo "STOP: Run sudo -i."
+  exit 1
+fi
+
+function check_variable () {
+  local var_name="$1"
+  if [ -z "${!var_name+x}" ]
+  then
+    echo "STOP: Define the variable $var_name like this: export $var_name=value"
+    exit 1
+  fi
+}
+
+function check_pushover_enabled () {
+  if [ ! -z "${pushover_enabled+x}" ]
+  then
+    if [ ! -n "${pushover_user_key+x}" ] || [ ! -n "${pushover_app_key+x}"  ]
+    then
+      echo "STOP: You're trying to setup Pushover but didn't provide your User and/or App key."
+      echo "Define the variables like this:"
+      echo "export pushover_user_key=put_your_userkey_here"
+      echo "export pushover_app_key=put_your_appkey_here"
+      exit 1
+    elif [ "${pushover_user_key}" = "put_your_userkey_here" ] || [  "${pushover_app_key}" = "put_your_appkey_here" ]
+    then
+      echo "STOP: You're trying to setup Pushover, but didn't replace the default User and App key values."
+      exit 1
+    else
+      USER_ENABLED_PUSHOVER=true
+      echo "export pushover_enabled=true" > /root/.teslaCamPushoverCredentials
+      echo "export pushover_user_key=$pushover_user_key" >> /root/.teslaCamPushoverCredentials
+      echo "export pushover_app_key=$pushover_app_key" >> /root/.teslaCamPushoverCredentials
+    fi
+  fi
+}
+
+function check_available_space () {
+  echo "Verifying that there is sufficient space available on the MicroSD card..."
+
+  local available_space="$( parted -m /dev/mmcblk0 u b print free | tail -1 | cut -d ":" -f 4 | sed 's/B//g' )"
+
+  if [ "$available_space" -lt  4294967296 ]
+  then
+    echo "STOP: The MicroSD card is too small."
+    exit 1
+  fi
+
+  echo "There is sufficient space available."
+}
+
+function get_script () {
+  local local_path="$1"
+  local name="$2"
+  local remote_path="${3:-}"
+  
+  wget -O "$local_path/$name" https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/"$remote_path"/"$name"
+  chmod +x "$local_path/$name"
+}
+
+function get_ancillary_setup_scripts () {
+  get_script /tmp create-backingfiles-partition.sh setup/pi
+  get_script /tmp create-backingfiles.sh setup/pi
+  get_script /tmp make-root-fs-readonly.sh setup/pi
+}
+
+function fix_cmdline_txt_modules_load ()
+{
+  echo "Fixing the modules-load parameter in /boot/cmdline.txt..."
+  cp /boot/cmdline.txt ~
+  cat ~/cmdline.txt | sed 's/ modules-load=dwc2,g_ether/ modules-load=dwc2/' > /boot/cmdline.txt
+  rm ~/cmdline.txt
+  echo "Fixed cmdline.txt."
+}
+
+BACKINGFILES_MOUNTPOINT=/backingfiles
+
+function create_usb_drive_backing_files () {
+  if [ ! -e "$BACKINGFILES_MOUNTPOINT" ]
+  then
+    mkdir "$BACKINGFILES_MOUNTPOINT"
+  fi
+
+  if [ ! -e /dev/mmcblk0p3 ]
+  then
+    /tmp/create-backingfiles-partition.sh "$BACKINGFILES_MOUNTPOINT"
+  fi
+  
+  if ! findmnt --mountpoint /backingfiles
+  then
+    echo "Mounting the partition for the backing files..."
+    mount /backingfiles
+    echo "Mounted the partition for the backing files."
+  fi
+
+  if [ ! -e /backingfiles/*.bin ]
+  then
+    /tmp/create-backingfiles.sh "$campercent" "$BACKINGFILES_MOUNTPOINT"
+  fi
+}
+
+function configure_archive_scripts () {
+  echo "Configuring the archive scripts..."
+
+  get_script /root/bin archiveloop run
+  get_script /root/bin archive-teslacam-clips run
+
+  if [ $RSYNC_ENABLE = true ]
+  then
+    get_script /root/bin archive-clips.sh run/rsync_archive
+    get_script /root/bin connect-archive.sh run/rsync_archive
+    get_script /root/bin disconnect-archive.sh run/rsync_archive
+  else
+    get_script /root/bin archive-clips.sh run/cifs_archive
+    get_script /root/bin connect-archive.sh run/cifs_archive
+    get_script /root/bin disconnect-archive.sh run/cifs_archive
+  fi
+
+  get_script /root/bin remountfs_rw run
+  
+  echo "Configured the archive scripts."
+}
+
+function configure_pushover_scripts() {
+  get_script /root/bin send-pushover run
+}
+
+function configure_rc_local () {
+  if grep -q archiveloop /etc/rc.local
+  then
+    return
+  fi
+  
+  echo "Configuring /etc/rc.local to run the archive scripts at startup..."
+  echo "#!/bin/bash -eu" > ~/rc.local
+  echo "archiveserver=\"${archiveserver}\"" >> ~/rc.local
+cat << 'EOF' >> ~/rc.local
+LOGFILE=/tmp/rc.local.log
+
+function log () {
+  echo "$( date )" >> "$LOGFILE"
+  echo "$1" >> "$LOGFILE"
+}
+
+log "Launching archival script..."
+/root/bin/archiveloop "$archiveserver" &
+log "All done"
+exit 0
+EOF
+
+  cat ~/rc.local > /etc/rc.local
+  rm ~/rc.local
+  echo "Configured rc.local."
+}
+
+function configure_hostname () {
+  echo "Configuring the hostname..."
+
+  local new_host_name="teslausb"
+  cp /etc/hosts ~
+  sed "s/raspberrypi/$new_host_name/g" ~/hosts > /etc/hosts
+
+  cp /etc/hostname ~
+  sed "s/raspberrypi/$new_host_name/g" ~/hostname > /etc/hostname
+  echo "Configured the hostname."
+}
+
+function make_root_fs_readonly () {
+  /tmp/make-root-fs-readonly.sh
+}
+
+echo "Verifying environment variables..."
+
+RSYNC_ENABLE="${RSYNC_ENABLE:-false}"
+
+if [ "$RSYNC_ENABLE" = true ]
+then
+  check_variable "RSYNC_USER"
+  check_variable "RSYNC_SERVER"
+  export archiveserver="$RSYNC_SERVER"
+  check_variable "RSYNC_PATH"
+else # Else for now, TODO allow both for more redundancy?
+  check_variable "sharename"
+  check_variable "shareuser"
+  check_variable "sharepassword"
+  
+  export cifs_version="${cifs_version:-3}"
+fi
+
+check_variable "archiveserver"
+check_variable "campercent"
+
+check_pushover_enabled
+
+if [ ! -e /root/bin ]
+then
+  mkdir /root/bin
+fi
+
+if [ "$RSYNC_ENABLE" = true ]
+then
+  get_script /root/bin verify-archive-configuration.sh run/rsync_archive
+  get_script /root/bin configure-archive.sh run/rsync_archive
+else
+  get_script /root/bin verify-archive-configuration.sh run/cifs_archive
+  get_script /root/bin configure-archive.sh run/cifs_archive
+  get_script /root/bin write-archive-credentials-to.sh run/cifs_archive
+fi
+
+get_script /root/bin get-archiveserver-ip-address.sh run
+
+/root/bin/verify-archive-configuration.sh
+
+check_available_space
+
+get_ancillary_setup_scripts
+
+pushd ~
+
+configure_archive_scripts
+
+configure_pushover_scripts
+
+fix_cmdline_txt_modules_load
+
+echo "" >> /etc/fstab
+
+create_usb_drive_backing_files
+
+/root/bin/configure-archive.sh
+
+configure_rc_local
+
+configure_hostname
+
+make_root_fs_readonly
+
+echo "All done."
diff --git a/setup/windows/WpaSupplicantConf.psm1 b/setup/windows/WpaSupplicantConf.psm1
new file mode 100644
index 0000000..93b9f7a
--- /dev/null
+++ b/setup/windows/WpaSupplicantConf.psm1
@@ -0,0 +1,91 @@
+function Write-Header {
+param(
+	[string]$driveLetter
+	)
+$header=@"
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
+update_config=1
+"@
+
+	Set-WpaSupplicantConfContent "$driveLetter" "$header"
+}
+
+function Add-Network {
+param(
+	[string]$driveLetter,
+	[string]$wifiSSID,
+	[string]$wifiPSK
+	)
+
+	$network=@"
+
+
+network={
+  ssid="$wifiSSID"
+  psk="$wifiPSK"
+}
+"@
+
+	Add-WpaSupplicantConfContent "$driveLetter" "$network"
+}
+
+function Set-WpaSupplicantConfContent {
+param(
+	[string]$driveLetter,
+	[string]$content
+	)
+
+	$wpaSupplicantConfPath = Get-WpaSupplicantConfPath $driveLetter
+	$encodedContent = Encode-Content $content
+	Set-Content -Value $encodedContent -Encoding Byte -Path "$wpaSupplicantConfPath"
+}
+
+function Add-WpaSupplicantConfContent {
+param(
+	[string]$driveLetter,
+	[string]$content
+	)
+
+	$wpaSupplicantConfPath = Get-WpaSupplicantConfPath $driveLetter
+	$encodedContent = Encode-Content $content
+	Add-Content -Value $encodedContent -Encoding Byte -Path "$wpaSupplicantConfPath"
+}
+
+function Verify-WpaSupplicantConfPath {
+param(
+	[string]$driveLetter
+	)
+
+	$drivePath="${driveLetter}:"
+	$configPath = "$drivePath\config.txt"
+	$cmdlinePath = "$drivePath\cmdline.txt"
+	$sshPath = "$drivePath\ssh"
+
+	if ((![System.IO.File]::Exists($configPath) -or
+		(![System.IO.File]::Exists($cmdlinePath)))) {
+		Write-Error "Didn't find cmdline.txt and config.txt on drive $drivePath."
+		exit 1
+	}
+}
+
+function Encode-Content {
+param(
+	[string]$content
+	)
+	$utf8 = New-Object System.Text.UTF8Encoding $false
+
+	return $utf8.GetBytes($content)
+}
+
+function Get-WpaSupplicantConfPath {
+param(
+	[string]$driveLetter
+	)
+
+	Verify-WpaSupplicantConfPath $driveLetter
+	
+	return "${driveLetter}:\wpa_supplicant.conf"
+}
+
+Export-ModuleMember -Function Write-Header
+Export-ModuleMember -Function Add-Network
\ No newline at end of file
diff --git a/setup/windows/add-wifi.ps1 b/setup/windows/add-wifi.ps1
new file mode 100644
index 0000000..cd1b06e
--- /dev/null
+++ b/setup/windows/add-wifi.ps1
@@ -0,0 +1,18 @@
+[CmdletBinding()]
+Param
+(
+    [Parameter(Mandatory=$True,Position=1)]
+    [string]$driveLetter,
+	
+    [Parameter(Mandatory=$True,Position=2)]
+    [string]$wifiSSID,
+
+    [Parameter(Mandatory=$True,Position=3)]
+    [string]$wifiPSK
+)
+
+Import-Module -Name ".\WpaSupplicantConf.psm1" -Force
+
+Add-Network "$driveLetter" "$wifiSSID" "$wifiPSK"
+
+Write-Verbose "All done."
diff --git a/windows_archive/setup-piForHeadlessConfig.ps1 b/setup/windows/setup-piForHeadlessConfig.ps1
similarity index 68%
rename from windows_archive/setup-piForHeadlessConfig.ps1
rename to setup/windows/setup-piForHeadlessConfig.ps1
index d2a1eea..a2a802c 100644
--- a/windows_archive/setup-piForHeadlessConfig.ps1
+++ b/setup/windows/setup-piForHeadlessConfig.ps1
@@ -11,6 +11,8 @@ Param
     [string]$wifiPSK
 )
 
+Import-Module -Name ".\WpaSupplicantConf.psm1" -Force
+
 $drivePath="${driveLetter}:"
 $configPath = "$drivePath\config.txt"
 $cmdlinePath = "$drivePath\cmdline.txt"
@@ -34,28 +36,9 @@ $cmdlinetxtContent.Replace("rootwait", "rootwait modules-load=dwc2,g_ether").Rep
 Write-Verbose "Enabling SSH ..."
 [System.IO.File]::CreateText($sshPath).Dispose()
 
-# Sets up wifi credentials so wifi will be 
-# auto configured on first boot
-
-$wpaSupplicantConfPath="$drivePath\wpa_supplicant.conf"
-
 Write-Verbose "(Re)creating WiFi configuration file $wpaSupplicantConfPath."
-if ([System.IO.File]::Exists("$wpaSupplicantConfPath")) {
-  del "$wpaSupplicantConfPath"
-}
 
-$wpaSupplicantConfContent=@"
-ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
-update_config=1
-
-network={
-  ssid="$wifiSSID"
-  psk="$wifiPSK"
-}
-"@
-
-$utf8 = New-Object System.Text.UTF8Encoding $false
-
-Set-Content -Value $utf8.GetBytes($wpaSupplicantConfContent) -Encoding Byte -Path "$wpaSupplicantConfPath"
+Write-Header "$driveLetter"
+Add-Network "$driveLetter" "$wifiSSID" "$wifiPSK"
 
 Write-Verbose "All done."
\ No newline at end of file
diff --git a/windows_archive/archive-teslacam-clips b/windows_archive/archive-teslacam-clips
deleted file mode 100644
index 8b2d793..0000000
--- a/windows_archive/archive-teslacam-clips
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash -eu
-
-LOG_FILE=/tmp/archive-teslacam-clips.log
-ARCHIVE_MOUNT=/mnt/archive
-
-function log () {
-  echo "$( date )" >> "$LOG_FILE"
-  echo "$1" >> "$LOG_FILE"
-}
-
-function move_clips_to_archive () {
-  log "Moving clips to archive..."
-  local move_count=0
-  for file_name in "$CAM_MOUNT"/TeslaCam/saved*; do
-    [ -e "$file_name" ] || continue
-    log "Moving $file_name ..."
-    mv -- "$file_name" "$ARCHIVE_MOUNT" >> "$LOG_FILE" 2>&1 || echo ""
-    log "Moved $file_name."
-    move_count=$((move_count + 1))
-
-  done
-  log "Moved $move_count file(s)."
-  if [ -r "/root/.teslaCamPushoverCredentials" ] && [ $move_count > 0 ]
-  then
-    log "Sending Pushover message for copied files."
-    /root/bin/send-pushover $move_count
-  fi
-  log "Finished moving clips to archive."
-}
-
-function disconnect_usb_drives_from_host () {
-  log "Disconnecting usb from host..."
-  modprobe -r g_mass_storage
-  log "Disconnected usb from host."
-}
-
-function ensure_archive_is_mounted () {
-  log "Ensuring cam archive is mounted..."
-  ensure_mountpoint_is_mounted_with_retry "$ARCHIVE_MOUNT"
-  log "Ensured cam archive is mounted."
-}
-
-log "Starting..."
-
-ensure_archive_is_mounted
-
-disconnect_usb_drives_from_host
-
-ensure_cam_file_is_mounted
-
-fix_errors_in_cam_file
-
-move_clips_to_archive
-
-unmount_cam_file
-
-connect_usb_drives_to_host
diff --git a/windows_archive/send-pushover b/windows_archive/send-pushover
deleted file mode 100644
index 6948c06..0000000
--- a/windows_archive/send-pushover
+++ /dev/null
@@ -1,14 +0,0 @@
-#!/bin/bash -eu
-
-function log () {
-  echo "$( date )" >> "$LOG_FILE"
-  echo "$1" >> "$LOG_FILE"
-}
-
-source /root/.teslaCamPushoverCredentials
-
-curl -F "token=$pushover_app_key" \
--F "user=$pushover_user_key" \
--F "title=Dashcam Copy Complete" \
--F "message=$1 file(s) were copied." \
-https://api.pushover.net/1/messages
diff --git a/windows_archive/setup-piForHeadlessConfigAddWifi.ps1 b/windows_archive/setup-piForHeadlessConfigAddWifi.ps1
deleted file mode 100644
index ef2d69f..0000000
--- a/windows_archive/setup-piForHeadlessConfigAddWifi.ps1
+++ /dev/null
@@ -1,31 +0,0 @@
-[CmdletBinding()]
-Param
-(
-    [Parameter(Mandatory=$True,Position=1)]
-    [string]$driveLetter,
-	
-    [Parameter(Mandatory=$True,Position=2)]
-    [string]$wifiSSID,
-
-    [Parameter(Mandatory=$True,Position=3)]
-    [string]$wifiPSK
-)
-
-$drivePath="${driveLetter}:"
-
-$wpaSupplicantConfPath="$drivePath\wpa_supplicant.conf"
-
-$wpaSupplicantConfContent=@"
-
-
-network={
-  ssid="$wifiSSID"
-  psk="$wifiPSK"
-}
-"@
-
-$utf8 = New-Object System.Text.UTF8Encoding $false
-
-Add-Content -Value $utf8.GetBytes($wpaSupplicantConfContent) -Encoding Byte -Path "$wpaSupplicantConfPath"
-
-Write-Verbose "All done."
diff --git a/windows_archive/setup-teslausb b/windows_archive/setup-teslausb
deleted file mode 100644
index c50b31b..0000000
--- a/windows_archive/setup-teslausb
+++ /dev/null
@@ -1,281 +0,0 @@
-#!/bin/bash -eu
-
-USER_ENABLED_PUSHOVER=false
-
-REPO=${REPO:-cimryan}
-
-BRANCH=${BRANCH:-master}
-
-if ! [ $(id -u) = 0 ]
-then
-  echo "STOP: Run sudo -i."
-  exit 1
-fi
-
-function check_variable () {
-  local var_name="$1"
-  if [ -z "${!var_name+x}" ]
-  then
-    echo "STOP: Define the variable $var_name like this: export $var_name=value"
-    exit 1
-  fi
-}
-
-function check_pushover_enabled () {
-  if [ ! -z "${pushover_enabled+x}" ]
-  then
-    if [ ! -n "${pushover_user_key+x}" ] || [ ! -n "${pushover_app_key+x}"  ]
-    then
-      echo "STOP: You're trying to setup Pushover but didn't provide your User and/or App key."
-      echo "Define the variables like this:"
-      echo "export pushover_user_key=put_your_userkey_here"
-      echo "export pushover_app_key=put_your_appkey_here"
-      exit 1
-    elif [ "${pushover_user_key}" = "put_your_userkey_here" ] || [  "${pushover_app_key}" = "put_your_appkey_here" ]
-    then
-      echo "STOP: You're trying to setup Pushover, but didn't replace the default User and App key values."
-      exit 1
-    else
-      USER_ENABLED_PUSHOVER=true
-      echo "export pushover_enabled=true" > /root/.teslaCamPushoverCredentials
-      echo "export pushover_user_key=$pushover_user_key" >> /root/.teslaCamPushoverCredentials
-      echo "export pushover_app_key=$pushover_app_key" >> /root/.teslaCamPushoverCredentials
-    fi
-  fi
-}
-
-function check_archive_server_reachable () {
-  echo "Verifying that the archive server $archiveserver is reachable..."
-  local serverunreachable=false
-  ping -c 1 -w 1 "$archiveserver" 1>/dev/null 2>&1 || serverunreachable=true
-
-  if [ "$serverunreachable" = true ]
-  then
-    echo "STOP: The archive server $archiveserver is unreachable. Try specifying its IP address instead."
-    exit 1
-  fi
-
-  echo "The archive server is reachable."
-}
-
-function write_archive_credentials_to () {
-  local file_path="$1"
-  
-  echo "username=$shareuser" > "$file_path"
-  echo "password=$sharepassword" >> "$file_path"
-
-}
-
-function check_archive_mountable () {
-  local archive_server_ip_address="$1"
-  
-  local test_mount_location="/tmp/archivetestmount"
-  
-  if [ ! -e "$test_mount_location" ]
-  then
-    mkdir "$test_mount_location"
-  fi
-  
-  local tmp_credentials_file_path="/tmp/teslaCamArchiveCredentials"
-  
-  write_archive_credentials_to "$tmp_credentials_file_path"
-  
-  local mount_failed=false
-  mount -t cifs "//$archive_server_ip_address/$sharename" "$test_mount_location" -o "vers=${cifs_version},credentials=${tmp_credentials_file_path},iocharset=utf8,file_mode=0777,dir_mode=0777" || mount_failed=true
-
-  if [ "$mount_failed" = true ]
-  then
-    echo "STOP: The archive couldn't be mounted with CIFS version ${cifs_version}. Try specifying a lower number for the CIFS version like this: export cifs_version=2"
-	exit 1
-  fi
-  
-  umount "$test_mount_location"
-}
-
-function check_available_space () {
-  echo "Verifying that there is sufficient space available on the MicroSD card..."
-
-  local available_space="$( parted -m /dev/mmcblk0 u b print free | tail -1 | cut -d ":" -f 4 | sed 's/B//g' )"
-
-  if [ "$available_space" -lt  4294967296 ]
-  then
-    echo "STOP: The MicroSD card is too small."
-    exit 1
-  fi
-
-  echo "There is sufficient space available."
-}
-
-function get_ancillary_setup_scripts () {
-  pushd /tmp
-  wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/create-backingfiles-partition.sh
-  chmod +x ./create-backingfiles-partition.sh
-  wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/create-backingfiles.sh
-  chmod +x ./create-backingfiles.sh
-  wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/make-root-fs-readonly.sh
-  chmod +x ./make-root-fs-readonly.sh
-  popd
-}
-
-function fix_cmdline_txt_modules_load ()
-{
-  echo "Fixing the modules-load parameter in /boot/cmdline.txt..."
-  cp /boot/cmdline.txt ~
-  cat ~/cmdline.txt | sed 's/[[:space:]]\+modules-load=[^ [:space:]]\+//' | sed 's/rootwait/rootwait modules-load=dwc2/' > /boot/cmdline.txt
-  rm ~/cmdline.txt
-  echo "Fixed cmdline.txt."
-}
-
-BACKINGFILES_MOUNTPOINT=/backingfiles
-
-function create_usb_drive_backing_files () {
-  mkdir "$BACKINGFILES_MOUNTPOINT"
-  /tmp/create-backingfiles-partition.sh "$BACKINGFILES_MOUNTPOINT"
-
-  echo "Mounting the partition for the backing files..."
-  mount /backingfiles
-  echo "Mounted the partition for the backing files."
-
-  /tmp/create-backingfiles.sh "$campercent" "$BACKINGFILES_MOUNTPOINT"
-}
-
-function configure_archive () {
-  local archive_server_ip_address="$1"
-
-  echo "Configuring the archive..."
-  
-  local archive_path="/mnt/archive"
-  
-  if [ ! -e "$archive_path" ]
-  then
-    mkdir "$archive_path"  
-  fi
-  
-  local credentials_file_path="/root/.teslaCamArchiveCredentials"
-
-  write_archive_credentials_to "$credentials_file_path"
-
-  echo "//$archive_server_ip_address/$sharename $archive_path cifs vers=${cifs_version},credentials=${credentials_file_path},iocharset=utf8,file_mode=0777,dir_mode=0777 0" >> /etc/fstab
-  
-  echo "Configured the archive."
-}
-
-function configure_archive_scripts () {
-  echo "Configuring the archive scripts..."
-  mkdir /root/bin
-
-  pushd ~
-  wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/archiveloop
-  sed s/ARCHIVE_HOST_NAME=archiveserver/ARCHIVE_HOST_NAME=$archiveserver/ ~/archiveloop > /root/bin/archiveloop
-  rm ~/archiveloop
-  chmod +x /root/bin/archiveloop
-  popd
-
-  pushd /root/bin
-  wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/archive-teslacam-clips
-  chmod +x archive-teslacam-clips
-  popd
-  echo "Configured the archive scripts."
-
-  pushd /root
-  wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/remountfs_rw
-  chmod +x remountfs_rw
-  popd
-  echo "Downloaded script to remount filesystems read/write if needed (/root/remountfs_rw)."
-}
-
-function configure_pushover_scripts() {
-if [ ${USER_ENABLED_PUSHOVER} = "true" ]
-then
-  pushd /root/bin
-  wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/send-pushover
-  chmod +x send-pushover
-  popd
-fi
-}
-
-function configure_rc_local () {
-  echo "Configuring /etc/rc.local to run the archive scripts at startup..."
-  echo "#!/bin/bash -eu" > ~/rc.local
-  tail -n +2 /etc/rc.local | sed '$d' >> ~/rc.local
-cat << 'EOF' >> ~/rc.local
-LOGFILE=/tmp/rc.local.log
-
-function log () {
-  echo "$( date )" >> "$LOGFILE"
-  echo "$1" >> "$LOGFILE"
-}
-
-log "Launching archival script..."
-/root/bin/archiveloop &
-log "All done"
-exit 0
-EOF
-
-  cat ~/rc.local > /etc/rc.local
-  rm ~/rc.local
-  echo "Configured rc.local."
-}
-
-function configure_hostname () {
-  echo "Configuring the hostname..."
-
-  local new_host_name="teslausb"
-  cp /etc/hosts ~
-  sed "s/raspberrypi/$new_host_name/g" ~/hosts > /etc/hosts
-
-  cp /etc/hostname ~
-  sed "s/raspberrypi/$new_host_name/g" ~/hostname > /etc/hostname
-  echo "Configured the hostname."
-}
-
-function make_root_fs_readonly () {
-  /tmp/make-root-fs-readonly.sh
-}
-
-echo "Verifying environment variables..."
-
-if [ ! -n "${cifs_version+x}" ]
-then
-  cifs_version=3
-fi
-
-check_variable "archiveserver"
-check_variable "sharename"
-check_variable "shareuser"
-check_variable "sharepassword"
-check_variable "campercent"
-
-check_pushover_enabled
-
-check_archive_server_reachable
-
-ARCHIVE_SERVER_IP_ADDRESS="$(ping -c 1 -w 1 $archiveserver 2>/dev/null | head -n 1 | grep -o -e "(\([[:digit:]]\{1,3\}\.\)\{3\}[[:digit:]]\{1,3\})" | tr -d '()')"
-
-check_archive_mountable "$ARCHIVE_SERVER_IP_ADDRESS"
-
-check_available_space
-
-get_ancillary_setup_scripts
-
-pushd ~
-
-configure_archive_scripts
-
-configure_pushover_scripts
-
-fix_cmdline_txt_modules_load
-
-echo "" >> /etc/fstab
-
-create_usb_drive_backing_files
-
-configure_archive "$ARCHIVE_SERVER_IP_ADDRESS"
-
-configure_rc_local
-
-configure_hostname
-
-make_root_fs_readonly
-
-echo "All done."