carsten/teslausb
1
0
Fork 0
mirror of https://github.com/cimryan/teslausb.git synced 2026-03-01 04:30:33 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'headless-patch' of github.com:rtgoodwin/teslausb into headless-patch

Browse Source
This commit is contained in:
Richard Goodwin
2018-10-26 07:28:34 -05:00
parent 3a03382075 2da60f4351
commit d3f130e7c6
1 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
headless-scripts/Readme.md
View File

@@ -11,7 +11,7 @@
## Configure the SD card before first boot of the Pi ## Configure the SD card before first boot of the Pi
1. Flash the image from [here (10-24 dated image)](https://www.dropbox.com/s/6f8kxenvtz8pkj9/image_2018-10-24-teslausb_headless-lite.zip?dl=0) using Etcher or similar. 1. Flash the image from [here (10-24 dated image)](https://www.dropbox.com/s/6f8kxenvtz8pkj9/image_2018-10-24-teslausb_headless-lite.zip?dl=0) using Etcher or similar. (Be sure to click the `...` on Dropbox and download the `.zip` file.)
1. Mount the card again, and in the `boot` directory create a `teslausb_setup_variables.conf` file to export the same environment varibles normally needed for setup (including archive, Wifi, and push notifications (if desired).) A sample conf file is in this repo. I.e. file should contain at a minimum (replace with your own values): 1. Mount the card again, and in the `boot` directory create a `teslausb_setup_variables.conf` file to export the same environment varibles normally needed for setup (including archive, Wifi, and push notifications (if desired).) A sample conf file is in this repo. I.e. file should contain at a minimum (replace with your own values):
``` ```
export archiveserver=Nautilus export archiveserver=Nautilus
@@ -78,4 +78,4 @@ Built image on a Raspi running Stretch, for maximum Pi-ception.
1. (Yes at this point you could suggest that just putting the end state files in place instead of patching would be good, but why not be idiomatic? :) ) 1. (Yes at this point you could suggest that just putting the end state files in place instead of patching would be good, but why not be idiomatic? :) )
1. Add a script to flash LEDs 1. Add a script to flash LEDs
1. Run `sudo ./build.sh` from the `pi-gen` directory. 1. Run `sudo ./build.sh` from the `pi-gen` directory.
1. If you get a failure, it's almost certainly after stage2, so you can add SKIP files in stage2-stage5 present) and rerun `sudo CLEAN=1 ./build.sh` 1. If you get a failure, it's almost certainly after stage2, so you can add SKIP files in stage2-stage5 present) and rerun `sudo CLEAN=1 ./build.sh`