Quotes in updater script, Readme updates, remount script.

README.md

@@ -91,7 +91,7 @@ If you don't have a keyboard/HDMI setup to boot the Pi and edit/transfer files d
 * Follow [these instructions](GetShellWithoutMonitorOnWindows.md), then skip down to the section titled **Set up Set up Wifi on the Pi (manually)y**. 
 
 #### macOS or Linux (Setup Wifi or USB Networking)
-* Follow [these instructions](GetShellWitoutMonitorOnLinux.md), then proceed to the section **Set up the USB Storage Functionality**.
+* Follow [these instructions](GetShellWithoutMonitorOnLinux.md), then proceed to the section **Set up the USB Storage Functionality**.
 
 
 ### Set up Wifi on the Pi (manually)
@@ -168,6 +168,9 @@ Now that you have Wifi up and running, it's time to set up the USB Storage and s
     ```
     reboot
     ```
+
+After reboot, the Pi hostname will become `teslausb`, so future `ssh` sessions will be `ssh pi@teslausb.local`. 
+
 ### Get the Pi set up for your Tesla.
 If you set up the Pi with a keyboard and a monitor disconnect it and connect it to a PC. If you're using a cable be sure to use the port labeled "usb" on the circuitboard. 
 1. Wait for the Pi to show up on the PC as a USB drive.
@@ -189,4 +192,6 @@ sudo -i
 mount / -o remount,rw
 mount /boot -o remount,rw
 ```
+A script has been provided as `/root/remountfs_rw` to run the mount commands for you more easily. 
+
 Then make whatever changes you need to. The next time the system boots the partitions will once again be read-only.

mac_linux_archive/update-rpi-mac-linux.sh

@@ -15,7 +15,7 @@
 #|| | Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 #|| #
 
-# Script repurposed fromhttps://github.com/BigNate1234/rpi-USBSSH
+# Script repurposed from https://github.com/BigNate1234/rpi-USBSSH
 #
 # This script will modify the cmdline.txt file on a freshly flashed Raspbian Stretch/Lite
 # It readies it for SSH, USB OTG, USB networking, and Wifi
@@ -79,18 +79,23 @@ fi
 # Sets up wifi credentials so wifi will be 
 # auto configured on first boot
 
+if [ -r "wpa_supplicant.conf" ]
+then
+  rm wpa_supplicant.conf
+fi
 
 cat << EOF >> wpa_supplicant.conf
 ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
 update_config=1
 
 network={
-  ssid=$SSID
+  ssid="$SSID"
-  psk=$WIFIPASS
+  psk="$WIFIPASS"
   key_mgmt=WPA-PSK
 }
 EOF
 
+
 cd
 echo ""
 echo '-- Files updated and ready for Wifi and SSH over USB --'

windows_archive/archive-teslacam-clips

@@ -81,7 +81,7 @@ function move_clips_to_archive () {
 
   done
   log "Moved $move_count file(s)."
-  if [ -r "/root/.teslaCamPushoverCredentials" ]
+  if [ -r "/root/.teslaCamPushoverCredentials" ] && [ $move_count > 0 ]
   then
     log "Sending Pushover message for copied files."
     /root/bin/send-pushover.sh $move_count

windows_archive/remountfs_rw

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+echo "Remounting / as read/write"
+mount / -o remount,rw
+echo "Remounting /boot as read/write"
+mount /boot -o remount,rw
+echo "Done. Make any changes needed, and reboot the Pi when ready."
+echo "Filesystems / and /boot will be mounted as read only after reboot."
+

windows_archive/setup-teslausb

@@ -133,8 +133,15 @@ function configure_archive_scripts () {
   chmod +x archive-teslacam-clips
   popd
   echo "Configured the archive scripts."
+
+  pushd /root
+  wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/remountfs_rw
+  chmod +x remountfs_rw
+  popd
+  echo "Downloaded script to remount filesystems read/write if needed (/root/remountfs_rw)."
 }
 
+
 function configure_pushover_scripts() {
 if [ ${user_enabled_pushover} = "true" ]
 then