carsten/teslausb
1
0
Fork 0
mirror of https://github.com/cimryan/teslausb.git synced 2026-02-28 20:20:32 +00:00
Code Issues Packages Projects Releases Wiki Activity

10-24 image scripts

Browse Source 
Tested working for me.
This commit is contained in:
Richard Goodwin
2018-10-24 08:31:16 -05:00
parent a373751033
commit 1bcca1b8dd
3 changed files with 43 additions and 37 deletions
Download Patch File Download Diff File Expand all files Collapse all files

26
headless-scripts/Readme.md
View File

@@ -11,8 +11,8 @@
## Configure the SD card before first boot of the Pi
1. Flash the image from [here](https://www.dropbox.com/s/zfzjbmx4744q810/image_2018-10-21-teslausb_headless-lite.zip?dl=0) using Etcher or similar.
1. Mount the card again, and in the `boot` directory create a `teslausb_setup_variables.conf` file to export the same environment varibles normally needed for setup (including archive, Wifi, and push notifications (if desired).) See the main README for all the variables. I.e. file should contain at a minimum (replace with your own values):
1. Flash the image from [here (10-24 dated image)](https://www.dropbox.com/s/6f8kxenvtz8pkj9/image_2018-10-24-teslausb_headless-lite.zip?dl=0) using Etcher or similar.
1. Mount the card again, and in the `boot` directory create a `teslausb_setup_variables.conf` file to export the same environment varibles normally needed for setup (including archive, Wifi, and push notifications (if desired).) A sample conf file is in this repo. I.e. file should contain at a minimum (replace with your own values):
```
export archiveserver=Nautilus
export sharename=SailfishCam
@@ -22,29 +22,25 @@
export SSID=your_ssid
export WIFIPASS=your_wifi_password
```
1. Run the `setup-piForHeadlessBuild.sh` (note: **not** `setup-piForHeadlessSetup.sh`):
```
curl https://raw.githubusercontent.com/rtgoodwin/teslausb/headless-patch/headless-scripts/setup-piForHeadlessBuild.sh -o setup-piForHeadlessBuild.sh
chmod +x setup-piForHeadlessBuild.sh
./setup-piForHeadlessBuild.sh <location_of_boot_directory>
```
1. If all goes well, put card into Pi and boot.
1. Wait for the the Pi to come up as a CAM USB drive, if you have it plugged into your computer. If plugged into just a power source, or your car, give it a few minutes until the LED starts pulsing steadily which means the archive loop is running and you're good to go.
* Boot it in your Pi, give it a bit, watching for a series of flashes (2, 3, 4, 5, maybe 6) and then a reboot and/or the CAM to become available on your PC/Mac.
* The Pi should be available at teslausb.local over Wifi (if it works) or USB networking (if it doesn't). Takes about 5 minutes for me. You should see in `/boot` the TESLAUSB_SETUP_FINISHED and WIFI_ENABLED files as markers of success too.
* Currently doesn't create the TeslaCam folder, so you'll need to do that before taking to your car.
* If plugged into just a power source, or your car, give it a few minutes until the LED starts pulsing steadily which means the archive loop is running and you're good to go.
## What happens under the covers
When the Pi boots the first time:
* A `/boot/teslausb-headless-setup.log` file will be created and stages logged. This takes the place of the "STOP" commands
* Marker files will be created in `boot` like `TESLA_USB_SETUP_STARTED` and `TESLA_USB_SETUP_FINISHED` to track progress. May use a progress system so the script can pick back up if needed. (This is probably useful for the general/old way of setup too.)
* The Pi LED will flash patterns as it gets to each stage (labeled in the setup-teslausb-headless script).
* Marker files will be created in `boot` like `TESLA_USB_SETUP_STARTED` and `TESLA_USB_SETUP_FINISHED` to track progress.
* (Working on a progress system so the script can pick back up if needed. This is probably useful for the general/old way of setup too.)
* Wifi is detected by looking for `/boot/WIFI_ENABLED` and if not, creates the `wpa_supplicant.conf` file in place and reboots.
* The Pi LED will flash patterns (2, 3, 4, 5, maybe 6) as it gets to each stage (labeled in the setup-teslausb-headless script).
* 10 flashes means setup failed!
* After the final stage and reboot the LED will go back to normal. Remember, the step to remount the filesystem takes a few minutes.
At this point the next boot should start the Dashcam/music drives like normal. If you're watching the LED it will start flashing every 1 second, which is the archive loop running.
> NOTE: Don't delete the `TESLAUSB_SETUP_FINISHED` file. This is how the system knows setup is complete.
> NOTE: Don't delete the `TESLAUSB_SETUP_FINISHED` or `WIFI_ENABLED` files. This is how the system knows setup is complete.
### Image builder source and patches

44
headless-scripts/setup-teslausb-headless
View File

@@ -88,7 +88,7 @@ function check_available_space () {
}
# function get_ancillary_setup_scripts () {
# pushd /tmp
# pushd
# wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/create-backingfiles-partition.sh
# chmod +x ./create-backingfiles-partition.sh
# wget https://raw.githubusercontent.com/"$REPO"/teslausb/"$BRANCH"/windows_archive/create-backingfiles.sh
@@ -111,20 +111,20 @@ BACKINGFILES_MOUNTPOINT=/backingfiles
function create_usb_drive_backing_files () {
mkdir "$BACKINGFILES_MOUNTPOINT"
/tmp/create-backingfiles-partition.sh "$BACKINGFILES_MOUNTPOINT"
/root/bin/tmp/create-backingfiles-partition.sh "$BACKINGFILES_MOUNTPOINT"
setup_log "Mounting the partition for the backing files..."
mount /backingfiles
setup_log "Mounted the partition for the backing files."
/tmp/create-backingfiles.sh "$campercent" "$BACKINGFILES_MOUNTPOINT"
/root/bin/tmp/create-backingfiles.sh "$campercent" "$BACKINGFILES_MOUNTPOINT"
}
function configure_archive () {
setup_log "Configuring the archive..."
mkdir /mnt/archive
local archive_server_ip_address="$(ping -c 1 -w 1 $archiveserver 2>/dev/null | head -n 1 | grep -o -e "(\([[:digit:]]\{1,3\}\.\)\{3\}[[:digit:]]\{1,3\})" | tr -d '()')"
echo "//$archive_server_ip_address/$sharename /mnt/archive cifs vers=3,credentials=/root/.teslaCamArchiveCredentials,iocharset=utf8,file_mode=0777,dir_mode=0777 0" >> /etc/fstab
echo "//$archive_server_ip_address/$sharename /mnt/archive cifs credentials=/root/.teslaCamArchiveCredentials,iocharset=utf8,file_mode=0777,dir_mode=0777 0" >> /etc/fstab
echo "username=$shareuser" > /root/.teslaCamArchiveCredentials
echo "password=$sharepassword" >> /root/.teslaCamArchiveCredentials
@@ -189,20 +189,20 @@ EOF
setup_log "Configured rc.local."
}
function configure_hostname () {
setup_log "Configuring the hostname..."
# function configure_hostname () {
# setup_log "Configuring the hostname..."
local new_host_name="teslausb"
cp /etc/hosts ~
sed "s/raspberrypi/$new_host_name/g" ~/hosts > /etc/hosts
# local new_host_name="teslausb"
# cp /etc/hosts ~
# sed "s/raspberrypi/$new_host_name/g" ~/hosts > /etc/hosts
cp /etc/hostname ~
sed "s/raspberrypi/$new_host_name/g" ~/hostname > /etc/hostname
setup_log "Configured the hostname."
}
# cp /etc/hostname ~
# sed "s/raspberrypi/$new_host_name/g" ~/hostname > /etc/hostname
# setup_log "Configured the hostname."
# }
function make_root_fs_readonly () {
/tmp/make-root-fs-readonly.sh
/root/bin/tmp/make-root-fs-readonly.sh
}
# TURN OFF LED so we can start watching progress
@@ -214,13 +214,13 @@ sleep 5
/etc/stage_flash 1
setup_log "SETUP STAGE 1: Check variables file."
if [ ! -e /boot/teslausb_setup_variables.conf ]
then
setup_log "ERROR: teslausb_setup_variables.conf file not found. Can't continue setup."
/etc/stage_flash 10
exit 1
fi
# setup_log "SETUP STAGE 1: Check variables file."
# if [ ! -e /boot/teslausb_setup_variables.conf ]
# then
# setup_log "ERROR: teslausb_setup_variables.conf file not found. Can't continue setup."
# /etc/stage_flash 10
# exit 1
# fi
source /boot/teslausb_setup_variables.conf
@@ -267,7 +267,7 @@ configure_archive
configure_rc_local
configure_hostname
# configure_hostname
# SETUP STAGE 5 and reboot
# If you see 5 flashes we are probably good!

10
headless-scripts/teslausb_setup_variables.conf.sample Normal file
View File

@@ -0,0 +1,10 @@
export archiveserver=your_archive_name_or_ip
export sharename=your_archive_share_name
export shareuser=username
export sharepassword=password
export campercent=100
export SSID=your_ssid
export WIFIPASS=your_pass
# export pushover_enabled=false
# export pushover_user_key=user_key
# export pushover_app_key=app_key